Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Anaheim Owner’s Guide
Boral concrete and clay tile roofing repair in Anaheim typically runs $600-$2,500 installed, depending on whether we’re replacing individual tiles, underlayment sections, or ridge components. We stock Boral-compatible tiles, fasteners, and flashing in common Anaheim profiles, and most repairs are completed in a single visit. Most Anaheim homeowners discover a Boral tile problem after a Santa Ana wind event, when a cracked cap tile slides down the roofline, or during the first hard rain of November when degraded underlayment lets water past the tile barrier.
Which Boral Models This Applies To
Boral’s U.S. roofing line includes concrete profiles like Saxony Slate, Saxony Split Shake, and Villa concrete tile, plus clay offerings in the Barcelona and Mission series. Each profile has a specific locking lug geometry and exposure dimension, and mixing series on the same slope creates both a visual mismatch and a water-management problem. We identify the correct replacement by measuring the exposed face, checking the underside for the Boral stamp and date code, and matching the color lot to Anaheim’s UV exposure patterns. Boral discontinued several pre-2016 color formulations, so OEM-matching sometimes requires a compatible aftermarket tile from Eagle or MCA, which we source through our Anaheim-area roofing suppliers. The critical gotcha: Boral’s concrete tiles from the 2003-2008 production window used a different lug thickness that cracks under repeated thermal cycling in inland Orange County heat. We check for this on every Anaheim inspection because installing a standard-thickness replacement on those lugs guarantees a callback.
Signs Your Boral Roofing Is Failing

- Cracked or missing cap and ridge tiles. The mortar bedding on Boral ridge assemblies degrades faster in Anaheim’s dry heat than the manufacturer originally specified for more temperate climates. Once the mortar crumbles, cap tiles shift during Santa Ana gusts and either crack at the lug or slide entirely off the ridge.
- Water stains on ceiling drywall after rain, but tiles look intact from the ground. Boral tiles are water-shedding, not waterproof; the underlayment beneath does the actual sealing. In Anaheim, that underlayment typically fails at 18-22 years, well before the concrete tiles themselves show wear.
- Granule accumulation in gutters or at downspout outlets. On Boral’s coated concrete profiles, accelerated granule loss indicates the acrylic finish has reached end of life. The tile still sheds water, but the porous concrete beneath absorbs moisture and spalls during freeze-thaw, which in Anaheim means the occasional January night below 40 degrees.
- Lifted or bellied tiles in the field. This points to failed fastening, either from original nail corrosion or from deck movement. Boral tiles installed over skip sheathing in the 1980s and 1990s are particularly prone; the nails back out, and the tile’s weight alone holds it until wind or foot traffic dislodges it.
- Daylight visible through the roof deck from inside the attic. On Boral installations with deteriorated underlayment, this means water has already found a path. In Anaheim’s occasional heavy downpours, a single compromised underlayment section can channel surprising volume into wall cavities.
Before
AfterReplacement Cost & What’s Included
Tile roof repair in Anaheim runs $600-$2,500, with most Boral-specific jobs landing in the $800-$1,800 range. A straightforward tile swap, two to four pieces with matching and re-bedding, starts near the bottom; partial underlayment replacement with deck repair pushes toward the top. We price by the scope, not by the square foot, and the written quote itemizes materials, labor, and disposal before any work starts. Under Clause 1 of the Haven Standard, that number is fixed; if we find additional damage after removal, we document it with photos, write a change order, and nothing proceeds until it’s signed. Our Boral-compatible repairs carry the 365-Day Done Right Promise, and every visit includes a documented photo record of what we found and what we did, delivered by text or email before we leave the site.
| Scope | Price Range |
|---|---|
| Individual tile replacement (1-6 pieces) | $600-$1,100 |
| Ridge cap re-bed and replace (10-20 linear ft) | $900-$1,600 |
| Underlayment section repair (100-200 sq ft) | $1,200-$2,500 |
| Full Boral-compatible underlayment replacement | $8,000-$20,000 |
DIY or Call Us?

An owner can safely check gutters for granule buildup and scan the roofline with binoculars for missing caps. Do not walk a Boral tile roof. Concrete and clay tiles crack under point loading, and the slope that makes them effective at shedding water makes them dangerous to stand on. The underlayment repair beneath the tiles requires removing intact pieces without breaking them, a technique that takes practice to execute without collateral damage. If you’re considering DIY for a single visible crack, know that mismatched replacement tiles and improper re-bedding are the two most common reasons we get called to redo a homeowner repair in Anaheim. For anything involving underlayment, fasteners, or ridge work, the safer and usually less expensive path is professional repair. Call (562) 245-4592 and we’ll schedule a free estimate with a written price before any work starts.
FAQs
The concrete or clay tiles themselves last 50-plus years, but the underlayment beneath typically requires replacement at 18-22 years in Anaheim’s UV and heat exposure. Call (562) 245-4592 for an inspection and exact quote, estimates are free.
Surface cracks can be sealed cosmetically, but any crack that penetrates the tile body compromises water management and requires replacement to maintain the system’s integrity. Call (562) 245-4592 for an inspection and exact quote, estimates are free.
Most single-visit repairs finish in two to four hours; underlayment section replacement typically requires one full day. Call (562) 245-4592 to schedule, estimates are free.
We carry Boral-compatible tiles, ridge components, fasteners, and underlayment in common Anaheim profiles and colors; specialty or discontinued colors require a one- to two-day supplier pull. Call (562) 245-4592 to confirm availability for your specific profile, estimates are free.
Rowan Construction Group Anaheim is an independent service provider, not affiliated with Boral Roofing. We also stock parts for and install roofing systems from GAF, Owens Corning, and other vetted brands, plus materials from KraftMaid, Cambria, and Silestone for our interior trades.
Grant Rowan’s approach has always been straightforward: measure twice, say it once, show your work. That discipline, learned at Los Angeles Trade-Technical College and refined across 4,000-plus projects since 2007, is what keeps our Anaheim roofing jobs within a few percent of the written price we agreed to.
Written by Grant Rowan, Owner, Rowan Construction Group Anaheim at Rowan Construction Group Anaheim, serving Anaheim and nearby areas.







Before
After
Before
After
Before
After