Boral Home Additions & ADU Nationwide

Boral Home Additions & ADU: The Anaheim Owner’s Guide

We stock and install Boral-compatible systems for home additions and ADU projects in Anaheim, with typical installed pricing running $45,000-$130,000 for additions and $90,000-$220,000 for detached ADUs. Most Anaheim homeowners discover their Boral exterior cladding, roofing, or hardscape component is failing during a permitted addition project when the inspector flags deteriorated substrate, or when water intrusion appears at the junction between the existing structure and new construction. We carry matching Boral profiles on our trucks for same-day assessment, and we quote every job in writing before any work starts.

Call (562) 245-4592

Which Boral Models This Applies To

Boral’s product lines for Southern California additions and ADUs fall into three categories: exterior cladding (Versetta Stone, Boral ProStone), roofing components (Boral concrete and clay tiles under the Boral Roofing division, now operating as Eagle Roofing Products in many markets), and hardscape pavers (Boral Belgard, now under the Oldcastle APG umbrella). The critical compatibility issue in Anaheim is matching the existing substrate thickness and fastening pattern, particularly where the new addition ties into a home built between 1960 and 1990.

To identify your specific Boral product, check the back face of any loose cladding piece for a stamped production code, or the underside of roof tiles for a date and plant mark. Versetta Stone panels measure 36 inches by 8 inches with an integrated fastening flange; ProStone uses a wire mesh backing at 15.5 inches by 48 inches. For roofing, Boral’s Saxony 900 profile and the older Regent line have different lock geometries that cannot be mixed on the same roof plane. We source OEM-equivalent material through our network of fifty-plus vetted brands, including direct matches for discontinued Boral profiles, and we document the exact spec on every quote under Clause 1 of the Haven Standard.

Rowan Construction Group Anaheim is an independent service provider and is not affiliated with Boral.

Signs Your Boral Home Additions & ADU Is Failing

• Cracking or spalling on concrete roof tiles, especially along the lower third of the roof where Santa Ana wind-driven rain sits longest. The porous body of older Boral concrete tile absorbs moisture, then the thermal cycle of Anaheim’s 100-degree summer days causes surface delamination. We see this most often on additions where the original roof was never designed for the extra HVAC load.
• Efflorescence or white staining on stone veneer at the addition tie-in. This indicates water is migrating through the scratch coat behind the Boral Versetta Stone, usually because the weep screed (the perforated metal strip at the base of the wall that lets moisture escape) was omitted or buried during the original addition build.
• Loose or rattling pavers in an ADU courtyard or walkway. Belgard pavers installed over an inadequately compacted base will shift under the point loads of modern outdoor furniture. In Anaheim’s clay-heavy soils, the freeze-thaw cycle is minimal, but seasonal saturation from irrigation runoff causes the same base failure.
• Soft drywall or baseboard staining on interior walls adjacent to the addition. When Boral ProStone’s water management layer fails at the transition flashing, water tracks along the sheathing and appears inside months later. The exterior often looks fine while the interior rots.
• Granule loss or bare spots on Boral-coated accessories like ridge vents or hip caps. These smaller components weather faster than the field tile because they’re thinner and sit at angles that catch more UV. They’re also the first point of failure in a wind event.

Before

After

Replacement Cost & What’s Included

The price you receive is flat and written before any work starts, every time. That quote includes the Boral-compatible material, all labor, permit fees, and a documented photo record of the existing condition and completed work. Under the 365-Day Done Right Promise, if the repair or addition integration fails due to our installation, we make it right at no charge. No change order gets executed without your signature, which is the discipline that has kept our projects within a few percent of the agreed price across 4,000-plus jobs since 2007.

DIY or Call Us?

There’s a clear line here. An Anaheim homeowner can safely walk the roof with binoculars to spot cracked tiles, or probe paver joints with a screwdriver to check for sand loss in the bedding layer. What you cannot safely do is remove and replace Boral concrete roof tiles on a slope, or cut into the WRB (water-resistive barrier) behind stone veneer to diagnose a leak. Roof tiles weigh 6-10 pounds each and the underlayment beneath them is your home’s last defense; one misstep on the battens tears it. Behind veneer, the scratch coat contains lime that will burn skin and eyes, and disturbing the membrane without knowing the fastening pattern invites bulk water intrusion.

We don’t sell parts for owner installation because the failure mode is almost always in the integration, not the component. A Boral tile that matches perfectly will still leak if the head lap or side lap is wrong for your roof pitch. Measure twice, say it once, show your work - that’s how we approach every assessment. Call (562) 245-4592 and we’ll schedule a free written estimate with the exact material spec and installed price.

FAQs