A Rowan company - serving Anaheim, CA

Barrette Roofing Nationwide

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Barrette Roofing: The Anaheim Owner’s Guide

Barrette roofing parts in Anaheim typically run $400-$1,800 installed for repairs, and we stock the most common Barrette-compatible components on our trucks. Most Anaheim homeowners discover a Barrette roofing issue after a Santa Ana wind event or the first heavy rain of winter, when a lifted ridge cap or cracked tile reveals itself as a leak stain on the ceiling below. We carry Barrette-compatible underlayment, ridge vents, hip and ridge caps, and tile fasteners, and we can usually match your existing profile without a special order.

Call (562) 245-4592

Which Barrette Models This Applies To

Barrette roofing systems were sold through Lowe’s and select regional distributors from roughly 2004 through 2016, primarily in the western U.S. The product lines you’re most likely to encounter in Anaheim are the Barrette Slate-Look composite tiles, the Barrette Shake-Profile line, and the earlier Barrette Traditional 3-Tab asphalt shingles. The composite tiles carry a date stamp on the underside near the locking tab, while the asphalt lines have a printed run code along the selvage edge that includes the manufacturing quarter and year.

The critical compatibility gotcha: Barrette composite tiles used a proprietary interlock geometry on the Slate-Look series produced before 2011 that differs from the post-2011 revision by about 3/16 inch on the lateral lock. If your roof was installed during the 2006-2010 window, we measure the lock depth before quoting, because mixing pre- and post-2011 tiles in the same course creates a gap line that channels water. For the asphalt lines, standard aftermarket architectural shingles from GAF or Owens Corning will layer correctly, though we note the color match in our written quote so you see the difference before we start.

We are an independent service provider with no affiliation to Barrette. We source OEM-equivalent parts through our regular roofing distributors, and when a true Barrette original is required, we special-order with a 5-7 business day lead time and quote that separately.

Signs Your Barrette Roofing Is Failing

Two professional roofers installing asphalt shingles on a residential house roof.
Signs Your Barrette Roofing Is Failing
  • Granule accumulation in gutters or downspout outlets. On Barrette asphalt shingles, heavy granule loss exposes the fiberglass mat to UV breakdown. In Anaheim’s high-sun climate, this accelerates after year 12 even on “lifetime” rated products. The mat cracks, water enters, and the crack propagates across the tab.
  • Lifted or missing ridge caps along the roof peak. Barrette ridge vents used a lower-profile design than competing brands, which made them more susceptible to uplift in Santa Ana conditions. Once the sealant strip fails, the cap flaps, the nails work loose, and the opening becomes a direct water path during wind-driven rain.
  • Cracked or chipped composite tiles, especially on south-facing slopes. The Slate-Look and Shake-Profile composites are polymer-modified concrete. After 15 years in Anaheim’s UV and thermal cycling, the surface glaze crazes, moisture wicks into the body, and freeze-thaw (yes, even here, on January nights) pops the face.
  • Interior stains that appear or worsen only during wind-driven rain. This pattern usually points to a failed hip or ridge seal, or to a tile shifted out of interlock. Barrette’s lower-profile tiles have less overlap margin than traditional clay, so a shifted tile exposes the underlayment directly.
  • Sagging or soft decking at the eaves or valleys. Barrette systems installed without adequate drip edge extension, or with the original 15-pound felt rather than synthetic underlayment, can wick moisture at the eave line. The OSB or plywood softens before the tile above shows any distress.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

For Barrette roofing work in Anaheim, our repair range is $400-$1,800, and a full roof replacement runs $8,000-$20,000 depending on square footage, pitch, and whether we find substrate damage once the old layer is off. Here’s how the repair range breaks:

Scope Typical Range
Spot repair: 1-3 composite tiles, underlayment patch $400-$750
Moderate repair: ridge/hip cap replacement, 10-20 sq. ft. underlayment $750-$1,200
Extensive repair: valley rebuild, multiple tile courses, decking patch $1,200-$1,800

What drives the range: access difficulty (two-story with steep pitch adds labor hours), whether we need to match discontinued colors from salvage stock, and what the decking looks like once we open it. Every quote is a flat written price with the scope itemized, and under Clause 1 of the Haven Standard, that price is locked before anyone touches a tool. If we find unexpected damage, we photograph it, write a change order with the new number, and nothing proceeds until you sign. The 365-Day Done Right Promise covers the repair against defects in workmanship or material failure.

DIY or Call Us?

professional contractor applying mortar to kitchen wall for tile installation
DIY or Call Us?

There is one thing every Anaheim homeowner can safely check: walk the perimeter with binoculars after a wind event and look for debris, shifted tiles, or exposed underlayment at the ridges. Note what you see. That’s useful information, and it costs nothing.

What we don’t recommend: climbing a pitched roof to handle composite tiles, working near the eaves where ladder placement is unstable, or attempting to seal a ridge vent from the surface. Barrette composite tiles weigh 8-10 pounds each and lock on two axes; removing one without disturbing the surrounding course takes a specific pry technique. More importantly, the underlayment beneath is your actual waterproofing layer, and damaging it while replacing a tile turns a $400 repair into a $1,200 one. The slope, the height, and the interlock complexity make this a trained-technician job in our view. Call (562) 245-4592 and we’ll schedule a free estimate with a written price before any work starts.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Construction help in Anaheim? Licensed & insured · Written quotes before work starts response · free estimates
Call (562) 245-4592
Local Service Coverage

Request a Free Estimate in Anaheim

Tell us what you need - Rowan Construction Group Anaheim responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Us
Call Now - 24/7 Dispatch