Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Roofing: The Anaheim Owner’s Guide
Tremron-compatible roofing repair in Anaheim typically runs $400-$1,800 installed, with most common part replacements completed in a single visit. We stock Tremron-matching underlayment, fasteners, and flashing profiles on our trucks, and we can usually source specific tile or shingle matches within 24 hours through our Anaheim-area suppliers. Most Anaheim homeowners discover a Tremron roofing part has failed after seeing water stains on ceiling drywall, finding granules in gutters after Santa Ana wind events, or noticing lifted tiles along the ridgeline where the original fastening pattern has degraded.
Which Tremron Models This Applies To
Tremron produces concrete roof tile in several profile lines that appear across Anaheim neighborhoods built from the late 1980s through the 2010s. The most common we encounter are the Olde Country barrel tile, the Slate flat profile, and the Shake textured line. Each uses a different fastening clip and underlayment specification. The Olde Country, for instance, requires a minimum 2-inch headlap in Anaheim’s wind zone, and the fastening pattern changes at 6:12 pitch. We identify the correct part by the stamped code on the tile underside, typically a four-digit batch number plus profile abbreviation. If tiles are missing entirely, we measure the exposed face, check the gauge of the existing battens, and match the fastening clip geometry.
OEM Tremron tiles are still manufactured in Florida with distribution through West Coast suppliers; lead time is usually 2-3 weeks for exact color matches. For repairs where a full section is being addressed, we often recommend compatible aftermarket concrete tile from Eagle Roofing or Boral, which meet the same ASTM C1492 standard and can be sourced faster in Anaheim. The decision depends on whether the repair zone is visible from street level and whether the homeowner plans to re-roof within five years. We document both options in writing before ordering.
Signs Your Tremron Roofing Is Failing

- Cracked or broken tiles at the rake edge or valley. Tremron concrete tile is durable but brittle under point impact. In Anaheim, cracked tiles most often trace to foot traffic during satellite or solar installs, or from palm fronds dropped during Santa Ana gusts. The crack allows direct water entry onto the #30 felt or synthetic underlayment below.
- Lifted or sliding tiles in the field. This indicates corroded or improperly spaced copper or stainless fastening nails, or degraded foam adhesive at the headlap. On south-facing slopes in Anaheim, thermal cycling accelerates the breakdown of older foam-set installations.
- Water staining at ceiling penetrations or exterior wall tops. Tremron systems rely on continuous valley metal and stepped flashing at walls. When the pan metal corrodes or the counterflashing separates, water tracks along the roof deck and exits at the least resistant point, often far from the actual breach.
- Granule accumulation in gutters or at downspout outlets. On Tremron’s coated color-through tile, heavy granule loss signals surface weathering that has reached the cementitious body. This is common on Anaheim roofs installed before 2005 that received the original organic-based color coat.
- Sagging or soft spots when walking the roof. This points to degraded underlayment or compromised roof sheathing beneath intact tile. Tremron tile can hide deck damage for years because the overlapping pattern sheds water even when the substrate has failed.
Before
AfterReplacement Cost & What’s Included
For Tremron roofing repair in Anaheim, our installed pricing breaks down as follows:
| Scope | Price Range |
|---|---|
| Tile replacement, localized (up to 10 tiles, standard color) | $400-$800 |
| Tile replacement, custom color match or discontinued profile | $700-$1,200 |
| Underlayment repair, valley or penetration (partial) | $800-$1,500 |
| Flashing replacement, chimney or wall | $600-$1,200 |
| Full section re-tile with underlayment (100 sq. ft.) | $1,200-$1,800 |
The range reflects three variables: accessibility (steep pitches or multi-story homes in Anaheim Hills add labor time), whether the original tile is still in production, and the condition of the substrate we find after removal. We strip to the deck, photograph what we find, and present a written revision if the scope changes. No work proceeds on a change until the change order is signed. Under Clause 1 of the Haven Standard, the price is written before anyone starts. Our repair work carries the 365-Day Done Right Promise.
DIY or Call Us?

An owner can safely check from the ground: scan with binoculars for obvious tile displacement, check gutters for unusual debris, and inspect attic spaces for daylight through the roof deck or damp insulation. What we do not recommend is walking a Tremron tile roof without proper hook ladder and roof jack placement. Concrete tile cannot support weight at the unsupported edges; a foot placed between battens cracks the tile and often the ones below it. At pitch above 6:12, the fall risk is significant and the tile breakage cascades. The fastening and underlayment work also requires understanding of Anaheim’s wind-driven rain requirements per the California Building Code. If you’ve found damage, call (562) 245-4592. We’ll photograph it, explain what we see, and give you a written price before any work starts.
FAQs
Concrete tile in Anaheim’s climate typically performs 40-50 years, but the underlayment beneath it often fails in 20-25 years due to UV degradation at fastener penetrations and thermal cycling. The tile itself may outlast two underlayment cycles. Call (562) 245-4592 for an exact assessment of your roof’s condition - estimates are free.
Individual cracked tiles can sometimes be sealed with compatible polymer cement as a temporary measure, but this is not a permanent solution. Underlayment and flashing failures require removal and replacement; there is no reliable field repair that meets code. Call (562) 245-4592 for a written scope and price.
Most localized repairs - tile swap, valley patch, or flashing replacement - are completed in one working day. Full section re-tile with underlayment replacement typically takes two days, plus inspection if required. We sequence so subcontractors do not stack, which is how we keep to the timeline we quote. Call (562) 245-4592 to schedule.
We carry universal-compatible underlayment, fasteners, and standard-profile concrete tile that meets Tremron specs. For exact color-matched Tremron tile, we source from Anaheim-area distributors with next-day availability for common colors; discontinued or custom blends require 2-3 weeks. We verify match before ordering. Call (562) 245-4592 to check your profile and color.
Rowan Construction Group Anaheim is an independent service provider and is not affiliated with Tremron. We source parts through standard wholesale channels and install to manufacturer specifications and local code.
Written by Grant Rowan, Owner, Rowan Construction Group Anaheim at Rowan Construction Group Anaheim, serving Anaheim and nearby areas.







Before
After
Before
After
Before
After